All Categories
roof mount split or underside choosing a parking ac architecture for a fleet-0

Company News

Home >  News >  Company News

Roof Mount, Split or Underside: Choosing a Parking AC Architecture for a Fleet

Time : 2026-11-18

Roof Mount, Split or Underside: Choosing a Parking AC Architecture for a Fleet

Two parking air conditioners with identical cooling capacity can behave very differently in service. The difference is architecture: where the evaporator sits, where the condenser sits, and how much of the truck the installer has to touch. For a single vehicle the choice is mostly about installation convenience. For a fleet of fifty it decides downtime, spare parts inventory and resale value.

Roof-mounted: the quick answer

A roof unit is one box through one opening. Installation takes hours rather than days, the refrigerant circuit is sealed at the factory, and there are no lines to route through the cab. Service access is good because everything is in one place. The costs are structural and thermal: the unit adds 30 to 45kg high on the cab, it occupies roof space that solar panels or clearance may want, and it sits in direct sun, which is exactly where heat gain is worst. It also raises overall height, which matters in yards with low canopies.

11.18_Fig1_Roof_Mounted_Monoblock.jpg

Split systems: comfort where it counts

In a split system the evaporator is inside the cab and the condenser is outside, connected by refrigerant lines. That separation buys two things: cooling is delivered where the driver sits rather than blown down from the roof, and the condenser can be placed where it gets cleaner, cooler air. The trade-offs are installation labour, a longer refrigerant circuit that must be evacuated and charged correctly, and more joints that can leak if the workmanship is poor. On a sleeper cab, the comfort difference is usually worth it.

11.18_Fig2_Split_System_Dual_Module.jpg

Back-wall and underside: keeping the roof clear

Back-wall and underside layouts free the roof entirely, which fleets appreciate when they add solar, aerodynamic fairings or height-restricted routes. The condenser runs cooler than a roof unit in strong sun, and the cab interior stays quieter. The exposure is different: road spray, stone damage and, on underside mounts, the risk of impact on rough sites. These layouts reward a protective guard and a service schedule that includes checking the coil for mud and salt.

The decision that matters most: who services it

Ask who will repair the unit in the third year, and what they will need. A sealed roof unit can often be swapped as a module by a general workshop. A split system needs someone who can handle refrigerant, which narrows the network. An underside unit needs a lift or a pit. The best architecture on paper is the one your local service partner can actually maintain, because a failed air conditioner in a heat wave costs more in lost driver hours than the unit cost to buy.

Standardising a mixed fleet

Fleets rarely have one vehicle type. A practical approach is to standardise by cab class rather than by brand loyalty: one architecture for light day cabs, one for sleepers, one for special bodies. That keeps the spare parts list short and lets drivers move between vehicles without relearning controls. Every extra variant adds a filter, a controller and a fan motor that must sit on a shelf somewhere.

11.18_Fig3_Fleet_Architecture_Comparison.jpg

A short comparison

Roof: fastest to install, lowest part count, highest thermal exposure, adds height. Split: best comfort and condenser placement, more installation skill, more joints. Back-wall or underside: cleanest roof and coolest condenser, best protection needed, restricted service access. None of the three is universally better; each is a fit to a vehicle type and a service network. In practice most fleets settle on roof units for light vehicles, split systems for sleepers and underside mounts for special bodies, and they keep one spare of each rather than five variants.

PREV : None

NEXT : Idle-Free Winter Heating for Fleets: Diesel Hydronic vs Engine Idling

News

roof mount split or underside choosing a parking ac architecture for a fleet-1
roof mount split or underside choosing a parking ac architecture for a fleet-2

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000